Mazda Forum - Mazda Enthusiast Forums

Mazda Forum - Mazda Enthusiast Forums (https://www.mazdaforum.com/forum/)
-   Mazda Protege (https://www.mazdaforum.com/forum/mazda-protege-23/)
-   -   Protege 5 front end problem/noise (https://www.mazdaforum.com/forum/mazda-protege-23/protege-5-front-end-problem-noise-26711/)

brokenwing 05-27-2011 11:37 AM

Protege 5 front end problem/noise
 
I have a 2002 mazda protege 5-manual trans, all wheel disc brakes, no ABS, 130K+ miles: There's this persistant/annoying problem with something in the front end. Seems like it's the right side. Shop did R bearing, rotors & alignment 4 mons ago. Was OK, but now noise is back. I swapped the R bearing again, the noise remained. So I swapped whole R knuckle and R tie rod end that seemed like it might be a bit sloppy... but I still have same noise (& very slight shimmy in steering wheel). The noise is louder as speed increases and the sound remains even if free wheeling/out of gear. (L knuckle was swapped 1 1/2 years ago, as well as both 1/2 shafts-CVs). I'm afraid to drive it over 55 mph, don't want to cause further damage. I jacked up front end, let wheels spin-they seem to turn true, no apparent bubbles on tires. Any ideas? What else can be wrong?...making me crazy! I love everthing else about this car-agile & fun to drive, but...! :confused:

estranged575 05-27-2011 03:25 PM

I have had similar problems for 8 months now. Had tie rod replaced 6 weeks ago, for the 3rd time, now making a "wub-wub" noise that will get louder, Anyone have any idea why this keeps happening after repeated tie rod replacements?

kmesser123 05-29-2011 06:16 PM

check into diffrential bearings and CV shafts, even if not torn the cv shafts can be bad, especially if you are on 130K OEM's
***NEVER*** lift a car and spin the wheels, the cv-shafts can fly apart from being at such an aggressive angle.


All times are GMT -5. The time now is 05:43 PM.


© 2024 MH Sub I, LLC dba Internet Brands