Seats in a pickup bed (California...)
#1
Seats in a pickup bed (California...)
Ok, I have done some research over the past week or so and no matter whereI look, nobody says anything definitive about the details of mounting seats, seatbelts, etc in the bed of a pickup truck (especially in California, where everything is illegal...). Anybody have any experience or know of anyone who has? or even read something about it somewhere? I live in california by the way. [&:]
#3
RE: Seats in a pickup bed (California...)
Yes, I agree... Occupants must be seat belted. Mazda seats is one of the important factor for safetiness.
#5
RE: Seats in a pickup bed (California...)
You could make a structure to bolt seats into, like an off-road truck. Make a tubular hoop that the seats bolt to, that hoop would be welded to flat plates on the floor of the bed, corresponding plates would go on the bottom of the bed and the plates would be bolted together to sandwich the floor. For most situations, that would be good enough, on my truck, I ran tubes from the bottom plates to the frame of my truck to tie them in.
Corbeau makes a real comfortable seat for around $150
Here's a pic of the inside of the rollcage on my Bronco and you get the idea....
[IMG]local://upfiles/2513/2CDA9E6E60C74072B3AE4F4EC24C364F.jpg[/IMG]
Corbeau makes a real comfortable seat for around $150
Here's a pic of the inside of the rollcage on my Bronco and you get the idea....
[IMG]local://upfiles/2513/2CDA9E6E60C74072B3AE4F4EC24C364F.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
Should i replace my 2 seats with sparco torrino racing seats or should i jst reapholstur my stock...
MazdaBabe
Detailing
4
10-20-2006 07:44 PM