Hello,
I been scratching my head on this one bought this car about a year ago been great but suddenly now when I accelerate hard enough to spool up the turbo the car completely stalls out, I would try to start the car and acts like it ran out of gas wait like 5,10 mins and start back up. only code I'm getting is the P2006 I cleared the code and won't come back unless I get it to stall. I was thinking fuel issue, but I have swapped out all the fuel components something I notice yesterday is that when it stalls, I unplug the fuel pressure sensor and plug it back in the car starts right back up (I have replaced the fuel pressure sensor and still does the same thing). I also ran the grounds at the motor mount and the small ground by the HPFP and the ground off the battery to make sure they are all good and didn't see any issues.

Parts I have swapped out.
Fuel pump in the tank
HPFP
solenoid for the intake runner valve
Fuel pressure sensor
fuel pump and circuit relay

has anyone ran into this issue or could point me in the right direction.

 

It might have clogged fuel lines or bad signals




. Look at what Mazda requires for proper diagnostics.