where does this go ?!?
 

aloha everyone,
i have a 93 b2200 mt 2.2l extended cab that met a tree on the passenger front side. in the course of repairing the damage it was necessary to remove the components on the passenger side of the inside engine compartment.

everything found its home except for three separate relays that have a bolt hole for installation. i took some pictures that show nothing but i did mark them a, b, c. apparently when i primered the engine compartment i covered the corresponding letter/relay location.

help please. if more info is needed just let me know and ill get it right back to you.

thanks ahead of time.

78 F
winds 8-15 mph sw
surf nw 10-15 ft

If the truck has an aftermarket carburetor, you don't need most at all.

These may help.......they are from a 1988 B2200, but most of that wiring and components stayed the same.

https://cimg5.ibsrv.net/gimg/www.maz...2fbca29cf8.jpg

https://cimg8.ibsrv.net/gimg/www.maz...8601d2c033.jpg

https://cimg4.ibsrv.net/gimg/www.maz...91252a0314.jpg

Someone will want to buy the unused stuff, sooner or later.

I agree. I still have the stock carburetor and would pay for the vacuum system as a backup at a reasonable price.

a great big aloha to you meb2000!!! thats exactly what i needed. the first picture has the three bad boys i was asking about mounted right where they should be. now if i can just find my keys.


76 F
winds E 8 mph
surf N 25-30 ft
W 15-20 ft

You're Welcome! Glad I could help you.

These pics are helpful, I have so much stuff missing from my truck. Whover owned before me really stripped this thing out. Thanks

If your truck has had the original carburetor replaced with a Holley or Weber, then you don't really need most of the items that are mounted to the inside of the passenger fender.

The horn relay stays.

Are you on facebook Mazda truck groups, ABE? You have such great knowledge of these trucks, it's kind of wasted on a site that has little traffic IMO.