93 Mazda B2200 Stalls with clutch in
 

Hey guys,

I have a Manual 93 B2200 EFI that when I engage my clutch the idle drops dramatically and is choppy, it goes into all the gears fine.

My friend told me it’s a vacuum leak but the brakes don’t cause this problem only the clutch, I was thinking maybe the slave or master cylinder doesn’t have the correct pressure? Not sure.

has anyone else dealt with this?
https://cimg0.ibsrv.net/gimg/www.maz...9c6ee1217.jpeg

https://cimg3.ibsrv.net/gimg/www.maz...6bfef42b8.jpeg

I might look at the clutch safety/start switch above the pedal. And if yours has cruise control, check that switch as well, similar appearance and location.