mazda rx7..please help: clutch
 

[:o] Please help... I have a mazda rx -7. I had a master cylinder rebuilt for the clutch. I have not completed the installation after the rebuilding of the master cylinder. Please help with any suggestions to insure I do it correctly. I am not sure of the procedure.
Thanks so much.....
Mike

RE: mazda rx7..please help: clutch
 

I don't know specifically about the RX7s, but generally, prime & bleed the MC before installation, install the hose to the slave, open the slave bleeder and allow it to bleed the system by gravity. When the fluid runs clear it should be done.