General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

Alternator change

Thread Tools
 
Search this Thread
 
  #1  
Old 11-02-2005, 08:47 PM
Dexxa's Avatar
Thread Starter
Join Date: Nov 2005
Posts: 2
Default Alternator change

My mazda 626 -88 2.0i with a 70ampere Alternator stopped to recharge my battery...And the problem most likely lies in my alternator. But i wonderd if somebody have a schematics or simular over the generator and the realys? My chargelamp (varninglamp) in the car don´t work when i turn on the power(Turn the key to its first step). And I know that in some cars (don´t know if it is so in a Mazda) this lamp have to work to gett a current/voltage to the battery. grateful for any help!
 
  #2  
Old 11-03-2005, 10:38 PM
babyhuey's Avatar
Senior Member
Join Date: Jul 2005
Posts: 2,747
Default RE: Alternator change

Step one should be ACC position and none of the dash lights should come on. Does the 'chargelamp' light come on when in the run position and the rest of the dash lights are on? I have never heard of a 'chargelamp' bulb burnt out causing a no charge condition on a Mazda.
 
  #3  
Old 11-04-2005, 01:28 PM
Dexxa's Avatar
Thread Starter
Join Date: Nov 2005
Posts: 2
Default RE: Alternator change

It was only the Alternator...10min work no problems. But the lamp in the dashbord dosen´t work. A bit to complicated to change...will change it some other time...Thanks for the help!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
moozmooz
Mazda Protege
3
06-13-2014 01:15 PM
shawn201974
Mazda 323,Mazda 626 & Mazda 929
0
02-01-2008 06:19 AM
daveo
Mazda Miata (MX-5)
0
01-01-2006 12:17 AM
rschlesinger
Mazda Millenia
5
12-09-2005 12:47 AM
jemhrm
Mazda MPV
0
06-07-2004 05:36 PM



Quick Reply: Alternator change



All times are GMT -5. The time now is 04:07 AM.