98 Millenia S "PLEASE HELP"

Mazda Forum Mazda Classifieds Photo Gallery Member List Search Contact Us Sponsors
Models Mazda News Mazda Recalls TSBs Timeslips Register Login

98 Millenia S "PLEASE HELP"

Printable Version

Mazda Forum >> Mazda Vehicles >> Mazda Millenia >> 98 Millenia S "PLEASE HELP"

Page: [1]

Message

<< Older Topic Newer Topic >>

98 Millenia S "PLEASE HELP" - 7/13/2008 6:27:41 PM

bflowerz

Posts: 1
Joined: 6/14/2008
Status: offline

I have a 98 Millenia s, bucks when given 1/2 throttle or more once engine has warmed to normal operating temp (about 20 - 30 min), happens faster with load on engine such as a/c or defroster. Dealer has gone thru vac lines and replaced solenoid pack but problem still present. Also have replaced plugs (NGK''s), coils (all 6), TPS, MAF, Speed Sensor, and fuel pressure regulator to no avail. Thought it might be precats, so I pulled all o2''s and drove car to see if problem still exists and it did. Any help or ideas would be greatly appreciated. Again I am not getting any codes at all.

Post #: 1

RE: 98 Millenia S "PLEASE HELP" - 7/13/2008 7:15:30 PM

keninn

Posts: 389
Joined: 9/2/2005
Status: offline

for some reason, i cannot answer your pm. what is your email?

(in reply to bflowerz)

Post #: 2

RE: 98 Millenia S "PLEASE HELP" - 10/23/2008 11:54:24 AM

mike 02

Posts: 15
Joined: 9/16/2008
Status: offline

Probably something to do with your tcs. I heard other callers complain of this problem, especially when the car is under a load.

(in reply to bflowerz)

Post #: 3

RE: 98 Millenia S "PLEASE HELP" - 11/5/2008 3:58:09 PM

01blueman10

Posts: 1
Joined: 10/28/2008
Status: offline

I had the same issue with my 98 Millenia. The check engine light would come on too. And failed the smog test mesirably.

Check the air intake hose for cracks/holes. You will not see it (in my case, them) unless you bend the hose hard or pull the hose out. After I replaced the hose the problems went away and it passed on the second smog test.

The mechanic at the dealer (where I bought the hose) told me that the holes on the hose would certainly cause these problems.

Hope this helps.

(in reply to bflowerz)

Post #: 4