What do these 2 wires do left side of ignition tumbler

Printable Version

Mazda >> Mazda Vehicles >> Mazda 323,Mazda 626 & Mazda 929 >> What do these 2 wires do left side of ignition tumbler

Page: [1]

Login Message << Older Topic   Newer Topic >>

What do these 2 wires do left side of ignition tumbler - 1/1/2006 6:00:09 PM    ripcbx   Posts: 52 Joined: 10/6/2005 Status: offline starter will not disengage when the key turns it on.The key can be pulled out of the lock and the car will still run even before this problem with the starter.I have now pulled the wheel and the switches.The only problem now is there is two wires coming into a connector on the side of the key tumbler on the left side that the solder came undone.I dont know what the wires are for and which wire goes where on the connector?What does this control? Post #: 1

RE: What do these 2 wires do left side of ignition tumbler - 1/1/2006 9:19:23 PM    bkey71 Posts: 1469 Joined: 9/9/2005 Status: offline If these are small gauge wires, I would think they are for the chime sensor that alerts you when keys are left in the ignition. (in reply to ripcbx) Post #: 2

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Mazda Prices

Mazda
Mazda Miata MX5
Mazda 3
Mazda RX-7
Mazda RX-8

Top 10 Posters
virgin1 4922 babyhuey 2759 sstlaure 2341 jaimie08mazd 2057 tracker 2038 the_gray_maz 1874 87 turbo ii 1692 dentinger 1518 bkey71 1469 speedy3 1136

New Vendors
Sportwing
Med Center Mazda
AMSOIL - Performance Oil Technology