power seat wiring

Mazda Forum Mazda Classifieds Photo Gallery Member List Search Contact Us Sponsors
Models Mazda News Mazda Recalls TSBs Timeslips Register Login

power seat wiring

Printable Version

Mazda Forums >> General Mazda Forums >> General Tech >> power seat wiring

Page: [1]

Message

<< Older Topic Newer Topic >>

power seat wiring - 3/2/2008 9:26:57 AM

hwystar

Posts: 2
Joined: 3/2/2008
Status: offline

Hello, I am trying to put a set of seats that I rescued from an MX-6 into a non Mazda product. My question is that the drivers side seat is power and comes with a 6 pin plug on it. Can anyone tell me what wire does what or even better have a diagram so that I can make a custom harness and keep the power function of the seat? I really don`t want to loose the power option if I don`t have to. Thanks in advance.

Post #: 1

RE: power seat wiring - 3/3/2008 9:12:26 AM

hwystar

Posts: 2
Joined: 3/2/2008
Status: offline

bump

(in reply to hwystar)

Post #: 2

RE: power seat wiring - 3/3/2008 9:15:29 AM

sstlaure

Posts: 2346
Joined: 11/28/2005
Status: online

Best bet would be to go find a Chiltons or Haynes manual. They tend to have fairly good wiring diagrams in the back and that may help you identify which pin does what.

You may also be able to go into a dealership and talk to the people at the parts counter. They have sketches/diagrams for just about everything and may be able to give you the detail you need.

Also...take a look at where the wires go under the seat. Not sure how many functions your seat has, but you may have power lumbar, power fore/aft movement, power recline, etc. If you can see which motor the wire goes to or where it is routed, that gives clues as to the function.

< Message edited by sstlaure -- 3/3/2008 9:17:20 AM >

_____________________________

2004 Mazda6 Sportwagon

Any statements made are purely my opinion

(in reply to hwystar)

Post #: 3