5th Gear Jumping Out

Mazda Forum Mazda Classifieds Photo Gallery Member List Search Contact Us Sponsors
Models Mazda News Mazda Recalls TSBs Timeslips Register Login

5th Gear Jumping Out

Printable Version

Mazda Forum >> General Mazda Forums >> General Tech >> 5th Gear Jumping Out

Page: [1]

Message

<< Older Topic Newer Topic >>

5th Gear Jumping Out - 1/20/2008 11:26:52 AM

rrdo

Posts: 5
Joined: 1/20/2008
Status: offline

Hello,

Got a 1997 Protege, 5-speed. When I shift into 5th gear, it keeps popping out (I can hold it in 5th if I push on the shifter). Took off transmission cover for the 5th/reverse gears and replaced the synchros (2) and 5th/Reverse clutch hub assembly. Did not correct the problem. I am now starting to think it is the 5th gear itself. The teeth in the 5th gear where the clutch hub assembly engages, looks a little worn. All other teeth look fine. Could this be the problem? Not sure of the tollerance?

Inspection of the shift linkage looks normal. I am scratching my head on this. Any help would be greatly appreciated.

Thanks,
David

Post #: 1

RE: 5th Gear Jumping Out (UPDATE) - 1/28/2008 6:45:41 AM

rrdo

Posts: 5
Joined: 1/20/2008
Status: offline

Hello Everyone,

Just wanted to provide an update to my problem. We changed the 5th gear itself and that solved our problem. Our guess is a lazy driver probably accidentally pulls the shifter out of 5th too many times without clutching and over time, wears out the 5th gear teeth that engage with the 5th/Reverse Clutch Hub Assembly (we are just guessing). When we compared the new 5th gear with the old 5th gear, the wear was very noticeable.

Again, just wanted to post in case this helps anyone else. By the way, the 5th gear is very accessible without having to drop the transmission. Easy change.

David

(in reply to rrdo)

Post #: 2