1992 Mazda MPV EFI System

Mazda Forum Mazda Classifieds Photo Gallery Member List Search Contact Us Sponsors
Models Mazda News Mazda Recalls TSBs Timeslips Register Login

1992 Mazda MPV EFI System

Printable Version

Mazda Forums >> Mazda Vehicles >> Mazda MPV >> 1992 Mazda MPV EFI System

Page: [1]

Message

<< Older Topic Newer Topic >>

1992 Mazda MPV EFI System - 12/28/2007 9:17:50 AM

zdaaaaa

Posts: 1
Joined: 12/28/2007
Status: offline

Hey,
I'm kind of fustrated with the EFI system, I have been following the self diagnostics simple instructions to troubleshoot my check engine light and I've had no luck with retrieving the code nor can I reset the check engine light by removing the negative connector from the battery and pressing the pedal down for 5 seconds or more. Have you heard of anyone unable to retreive codes or having these issues ? Can you verify if I'm doing everything right ? (steps below)

I warmed up the van prior to doing this.

1. Put a jumper wire from single green pin connector to a suitable ground (I used the frame).
2. Put the car in Neutral.
3. Turned off all accessories.
4. Then turned the car into the ON position.

My Current Results
The check engine light stays solid.