wiring b2200 for trailer

Mazda Forum Mazda Classifieds Photo Gallery Member List Search Contact Us Sponsors
Models Mazda News Mazda Recalls TSBs Timeslips Register Login

wiring b2200 for trailer

Printable Version

Mazda Forum >> Mazda Vehicles >> Mazda Pickup Trucks >> wiring b2200 for trailer

Page: [1]

Message

<< Older Topic Newer Topic >>

wiring b2200 for trailer - 12/22/2007 11:48:33 AM

willy3486

Posts: 34
Joined: 11/9/2007
Status: offline

I have a couple of small trailers I pull. I want to set up a plug for tailights on my 91 b2200 truck to connect to the trailers. I use these other trailers on other vehicles so I don't want to change the trailer wiring. The trailers have 4 wires,
White is ground
Yellow is driver stop and turn
Green is passinger stop and turn
Brown is running/parking lights.

I checked my truck out and it had a 4 prong that didn't work. But it had 5 wires going in.
it had wires for left turn,right turn but the brake was on one wire and the running lights were on one.
How can I wire this up to work? Is there an adapter to go from 5 to 4 wires? I did not take the taillight out but it looks like it has one bulb in the back for taillights , one for brake lights and one for turn signals. Does anyone know of a diagram to wire a trailer connector with ony four pole plug?

Post #: 1

RE: wiring b2200 for trailer - 12/23/2007 1:47:28 PM

Cusser

Posts: 133
Joined: 3/11/2007
Status: offline

There are adapters available for this, for vehicles that have separate brake lights and turn signal lights, look at www.etrailer.com or local parts store.

(in reply to willy3486)

Post #: 2

RE: wiring b2200 for trailer - 12/27/2007 8:28:32 PM

toddluck

Posts: 84
Joined: 6/11/2007
Status: offline

http://www.etrailer.com/pc-ELEB~118130.htm

(in reply to Cusser)

Post #: 3