1992 B2600I TIMING

Mazda Forum Mazda Classifieds Photo Gallery Member List Search Contact Us Sponsors
Models Mazda News Mazda Recalls TSBs Timeslips Register Login

1992 B2600I TIMING

Printable Version

Mazda Forums >> Mazda Vehicles >> Mazda Pickup Trucks >> 1992 B2600I TIMING

Page: [1]

Message

<< Older Topic Newer Topic >>

1992 B2600I TIMING - 12/19/2007 7:27:35 PM

cayeb

Posts: 5
Joined: 10/20/2007
Status: offline

MY TRUCK FAILED EMISSION TESTING TODAY ( NOX, CO & HC). I WAS ADVISED TO DO TIMING ON THE TRUCK FIRST. I HAVE A TIMING LIGHT AT HOME BUT I'M NOT SURE IF I'M DOING IT PROPERLY. ANYONE CAN ASSIST ME i WOULD REALLY APPRECIATE IT.

Post #: 1

RE: 1992 B2600I TIMING - 12/19/2007 7:31:27 PM

supratreo

Posts: 35
Joined: 10/7/2007
Status: offline

first turn the crank so you can see the notch on the crank pully and put some bright paint on it so you can see it while the motor is running. then jump the diag. connecter and use your light to set the timing to 5 deg. (give or take 1 deg.) by turning the distributor. also check your idle at this time.

(in reply to cayeb)

Post #: 2

RE: 1992 B2600I TIMING - 12/20/2007 11:27:31 AM

cayeb

Posts: 5
Joined: 10/20/2007
Status: offline

thanks for the reply.Sorry for my ignorance but where is the diagnostic connector for this truck. Is there a proper way of jumping the connector

(in reply to cayeb)

Post #: 3

RE: 1992 B2600I TIMING - 12/20/2007 11:58:20 AM

bigboss2010

Posts: 65
Joined: 12/19/2007
Status: offline

the connector is located on the passenger side of the truck it is green in color, and as far as jumping if you have a manual it will tell you the proper way to do this.

(in reply to cayeb)

Post #: 4

RE: 1992 B2600I TIMING - 12/20/2007 7:57:37 PM

cayeb

Posts: 5
Joined: 10/20/2007
Status: offline

bigboss2010,

i found the connector but i don't have a manual to do the proper jumping. Any idea how to do it properly?

(in reply to bigboss2010)

Post #: 5