RE: Weber Convo's

Mazda Forum Mazda Classifieds Photo Gallery Member List Search Contact Us Sponsors
Models Mazda News Mazda Recalls TSBs Timeslips Register Login

RE: Weber Convo's

Printable Version

Mazda Forums >> Mazda Vehicles >> Mazda Pickup Trucks >> RE: Weber Convo's

Page: << < prev 1 [2]

Message

<< Older Topic Newer Topic >>

RE: Weber Convo's - 2/13/2008 2:07:54 AM

Cusser

Posts: 128
Joined: 3/11/2007
Status: offline

The Weber electric choke wire plugs into the rear of the alternator, not sure of the color as it's nighttime here. You can either run the EGR vacuum directly or off the water valve or not at all or make an EGR block-off plate. The EGR valve itself will function as a block off plate if there's no vacuum to it, and its internal spring-loaded valve is closed.

(in reply to 86b2000)

Post #: 11

RE: Weber Convo's - 2/20/2008 6:10:58 PM

mtvjackass74

Posts: 11
Joined: 5/5/2007
Status: offline

yea, i just put a weber on my 87 mazda and i love it! wish i did this 2 yrs ago when i put my new motor in. easy install, did have to throw on a fuel regulator. check it out on YOUTUBE weber mazda. also have a 38 weber for sell for mazda pickup, asking 320.00........still new in the box, paid over 400.00. i opted for the 32/36 since mpg is a issue for me, (work truck) 38 does seem to like the gas a little more, but from what i heard, turns that 4 into a 6.

(in reply to Cusser)

Post #: 12

RE: Weber Convo's - 2/22/2008 5:52:17 PM

TheMercuyMan

Posts: 1
Joined: 2/22/2008
Status: offline

just bought a 87b2600 4x4 installed the 34 dgec didnt want to spend the extra money on a $300 truck for the 38. seems to run fine it has 33s on the rear and 31s on the front way too big on the back.

(in reply to mtvjackass74)

Post #: 13

RE: Weber Convo's - 3/17/2008 11:06:20 AM

Wookie_vw_golf

Posts: 2
Joined: 3/17/2008
Status: offline

I just threw my weber on and it still hasn't even seen the road

(in reply to TheMercuyMan)

Post #: 14

RE: Weber Convo's - 3/17/2008 5:34:06 PM

tnerb

Posts: 34
Joined: 3/1/2008
Status: offline

I am fairly pissed at webber. the jets they gave me are not for my altitude and I have the idle mixture screw out eight turns, it should be two at the max is says. assholes now I have to buy a jet kit. for a hundred dollars . and dick around with it. better be worth it. wont even idle until its warm and spits and chugs even after that. thats when im at stop light or whatnot in gear.. just pissed off becuase there instructions are horrible, they have you grind an adapter plate and well, the jetting. F00ey ! :D

(in reply to Wookie_vw_golf)

Post #: 15

RE: Weber Convo's - 3/20/2008 7:51:16 PM

tnerb

Posts: 34
Joined: 3/1/2008
Status: offline

actually its not my jets. they might be fine. I think i was stupid and did not get all the vaccum hoses. I pluged a couple with my finger and it did stuff to the engine. My bad, weber might be a great carb but the instructinos are shit. i mean come on, fax copy stappled together instructions ? a lot can be done in that department. but I am just happy my truck is going now. synthetic oil stopped a lot of the smoke. as well as the vac hoses being plugged

(in reply to tnerb)

Post #: 16