getting door panel off. HELP

Mazda Forum Mazda Classifieds Photo Gallery Member List Search Contact Us Sponsors
Models Mazda News Mazda Recalls TSBs Timeslips Register Login

getting door panel off. HELP

Printable Version

Mazda >> General Mazda Forums >> General Tech >> getting door panel off. HELP

Page: [1]

Message

<< Older Topic Newer Topic >>

getting door panel off. HELP - 11/14/2005 3:22:31 AM

robspunk

Posts: 1
Joined: 11/14/2005
Status: offline

im trying to get my door panel off so i can install a speaker. I can find how to get the window winder off. I have an 86' mazda323 hatch
Please help!

Post #: 1

RE: getting door panel off. HELP - 11/14/2005 3:27:34 AM

Alucard

Posts: 379
Joined: 10/9/2005
From: Mustang, Oklahoma
Status: offline

Ok well you should just have three or four screws in the handle and the arm rest looking thing. Then after that you just pop the door panel off. It has those button things so just pull on the edges (very carefully) and it should just pop it off. I mean I have a 92 323 and I figure its pretty much the same.

I hope that helps I don't have a digital camra other wise I would show you pics of when I took mine off.

I hope that helps

< Message edited by Alucard -- 11/14/2005 3:28:22 AM >

(in reply to robspunk)

Post #: 2

RE: getting door panel off. HELP - 11/14/2005 7:47:21 PM

bkey71

Posts: 1469
Joined: 9/9/2005
Status: offline

In order to remove the window crank , there is a hidden horseshoe shaped clip. This clip is located right behind the center of the crank handle where it enters into the door. The best tool to use can be bought at most part stores. Look in the "HELP!" section where the tools are at. It is called GM window crank removal tool. It is a flat tool about 5" long and has a "U" shaped end that will engage the clip to remove it. ALSO be careful not to lose the clip when removing it.

(in reply to robspunk)

Post #: 3