mazda problems again..go figure.won't start.

Mazda Forum Mazda Classifieds Photo Gallery Member List Search Contact Us Sponsors
Models Mazda News Mazda Recalls TSBs Timeslips Register Login

mazda problems again..go figure.won't start.

Printable Version

Mazda >> Mazda Vehicles >> Mazda Millenia >> mazda problems again..go figure.won't start.

Page: [1]

Message

<< Older Topic Newer Topic >>

mazda problems again..go figure.won't start. - 11/13/2007 2:02:22 PM

mazdakorey

Posts: 10
Joined: 6/4/2007
Status: offline

i have the 95 mazda millenia 2.5L. the other day i drove down to the gas station, no problems, i filled up, went to start it up again and it died out, i finally got it started and drove home but i had to keep the RPMs up to make it stay running. we replaced the distributor, since i had the warranty. it ran fine for a day then boom, same thing as before. it won't even start now. and when it does, it dies out right away. i got two fault codes:
i got a P0100
and i got a P1345

from my understanding the P1345 has to do with the cam sensor or something and it located in the actual distributor. i think this may just be a left over code from before but i'm not sure

anyone have any idea's as to what my problem could be? i honestly think it may be a vaccum leak, but i'm not too sure.

Post #: 1

RE: mazda problems again..go figure.won't start. - 11/14/2007 10:08:53 AM

kellybell

Posts: 24
Joined: 10/31/2007
Status: offline

Doesnt sound too bad, see here:

http://www.obd-codes.com/trouble_codes/generic/p0100-maf-mass-air-flow-circuit-malfunction.php

(in reply to mazdakorey)

Post #: 2

RE: mazda problems again..go figure.won't start. - 11/14/2007 7:14:56 PM

mazdakorey

Posts: 10
Joined: 6/4/2007
Status: offline

yes, true this could be a contribution to my problem. Although, it does say you usually wouldn't experience any major driveability problems, and that piece won't even start at all.

ugh, i don't know, i know i'm getting spark and good fuel pressure. i'm completely drawing a blank on this one.

(in reply to kellybell)

Post #: 3