Alternator change

Mazda Forum Mazda Classifieds Photo Gallery Member List Search Contact Us Sponsors
Models Mazda News Mazda Recalls TSBs Timeslips Register Login

Alternator change

Printable Version

Mazda >> General Mazda Forums >> General Tech >> Alternator change

Page: [1]

Message

<< Older Topic Newer Topic >>

Alternator change - 11/2/2005 6:47:21 PM

Dexxa

Posts: 2
Joined: 11/2/2005
Status: offline

My mazda 626 -88 2.0i with a 70ampere Alternator stopped to recharge my battery...And the problem most likely lies in my alternator. But i wonderd if somebody have a schematics or simular over the generator and the realys? My chargelamp (varninglamp) in the car don´t work when i turn on the power(Turn the key to its first step). And I know that in some cars (don´t know if it is so in a Mazda) this lamp have to work to gett a current/voltage to the battery. grateful for any help!

Post #: 1

RE: Alternator change - 11/3/2005 8:38:02 PM

babyhuey

Posts: 2759
Joined: 7/28/2005
Status: offline

Step one should be ACC position and none of the dash lights should come on. Does the 'chargelamp' light come on when in the run position and the rest of the dash lights are on? I have never heard of a 'chargelamp' bulb burnt out causing a no charge condition on a Mazda.

(in reply to Dexxa)

Post #: 2

RE: Alternator change - 11/4/2005 11:28:20 AM

Dexxa

Posts: 2
Joined: 11/2/2005
Status: offline

It was only the Alternator...10min work no problems. But the lamp in the dashbord dosen´t work. A bit to complicated to change...will change it some other time...Thanks for the help!

(in reply to babyhuey)

Post #: 3