roll over switch?

Mazda Forum Mazda Classifieds Photo Gallery Member List Search Contact Us Sponsors
Models Mazda News Mazda Recalls TSBs Timeslips Register Login

roll over switch?

Printable Version

Mazda >> Brand Review >> Electronics, Computer & Fuel Systems >> roll over switch?

Page: [1]

Message

<< Older Topic Newer Topic >>

roll over switch? - 6/16/2007 7:33:28 PM

papalaw33

Posts: 1
Joined: 6/16/2007
Status: offline

im working on an 87 rx7. i get no power to the fuel pump or starter. we have swaped ecu's to no prevail, and hooked the two problems strait to the battery so we know there not bad. is there a rollover switch? has anybody had this problem before? fixed it? any help would be greatly appreciated. thank you.

Post #: 1

RE: roll over switch? - 8/27/2007 10:47:37 AM

hixx

Posts: 451
Joined: 8/26/2007
Status: offline

I would start at the ignition switch. Also drivers side under the hood at the firewall is the main relay which powers the ECU ouputs,however it will not effect the starter circuit. If it is an A/T it has an inhibitor switch attached to the trans which the starter circuit goes through.

(in reply to papalaw33)

Post #: 2