Mazda Forum
 
Mazda Forum   Mazda Classifieds   Photo Gallery   Member List   Search   Contact Us   Sponsors
  Models   Mazda News   Mazda Recalls   TSBs   Timeslips   Register   Login  

speed chip?

  Printable Version
Mazda >> Mazda Vehicles >> Mazda3 >> speed chip? Page: [1]
Login
Message << Older Topic   Newer Topic >>
speed chip? - 5/22/2007 6:36:26 PM   
bbbbrittell

 

Posts: 13
Joined: 4/30/2007
Status: offline
does any 1 have a speed chip for a mazda 3 hatch and if u do wat are some good ones and would it f#$k my engine up
Post #: 1
RE: speed chip? - 5/22/2007 6:43:41 PM   
JimsMazda3

 

Posts: 95
Joined: 5/13/2007
Status: offline
quote:

ORIGINAL: bbbbrittell

does any 1 have a speed chip for a mazda 3 hatch and if u do wat are some good ones and would it f#$k my engine up

From what I've read the short time I've been on the forum is, NO. I wish Superchips made one for our Mazda3's. I have one for my 04 Hemi Ram and it lowered my 0-60 and 1/4 times by a full 1/2 second, I even get a 2nd gear scratch at WOT when it shifts.
Jim

_____________________________

2007 Mazda3 s Sport. Silver with Grey Cloth interior and Auto Trans.
Mods: Muffler removed, Stainless exhaust tip, K&N filter, Cargo tray, Bubble mirros, Stainless door sills, Stainless "Zoom Zoom" License frame, Stubby antenna & Bumper steps.

(in reply to bbbbrittell)
Post #: 2
RE: speed chip? - 5/22/2007 11:38:47 PM   
bbbbrittell

 

Posts: 13
Joined: 4/30/2007
Status: offline
tru tru
I want more horses!!!!!!!!!!!!!!!!!!!!!!!! but i dont feel like goin for a turbo i was better off gettin the speed 3 i got AEM intaake  BORLA exhaust and VIBRANT headers. is there anything else i can gte that will increase my horses and torque that wont blow my engine up in 5 days!?????

(in reply to JimsMazda3)
Post #: 3
RE: speed chip? - 5/23/2007 1:46:21 AM   
MrTea

 

Posts: 283
Joined: 2/11/2006
Status: offline
only little things at this point, unless you want to spend the cash on the Microtech standalone ($1400).  there is a guy that optimizes the stock TB ($130 i thing?) to give a much better throttle response, and a tad of hp.  there should be an intake manifold out later in the year that will work, in the $500 range, or you can spend $700 for the Cosworth manifold that is out currently.

depending on what you do with your car, there are some better things you can do than HP. 

autox, you should be looking at suspension and tires
road race, you should be looking at suspension, brakes, tires
1/4 or stoplight racing, you can go for some smaller wheels and better tires and you'll feel a big gain

(in reply to bbbbrittell)
Post #: 4
RE: speed chip? - 5/23/2007 4:34:03 AM   
Tracker


Posts: 2038
Joined: 1/9/2006
Status: offline
Tracker's photo gallery
just to let u know there is no such thing as a fast all motor 3....and there wont be for a long while. A turbo doesnt really make a car unrealiable its all about if its put in right, if its tuned right, and most importantly if u keep or gas pedal off the floor.

_____________________________

R.I.P Jay: Gone but not forgotten
R.I.P Uncle James: I didnt deserve you


(in reply to bbbbrittell)
Post #: 5
RE: speed chip? - 6/4/2007 12:18:30 PM   
iflyducati


Posts: 68
Joined: 11/14/2006
Status: offline
I gotta agree with Mr Tea. In fact I set my car up for cornering with work to the suspension, tires and brakes.  I'd love to go forced induction (HiBoost) just to around 4 psi (200 whp) I think that would be a great improvement, reliable (even for an Atx) and quick enough but just a little 2 expensive.  Unfortunately Hp is expensive.  

(in reply to Tracker)
Post #: 6
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Mazda Forums >> Mazda Vehicles >> Mazda3
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
virgin14970
babyhuey2759
sstlaure2345
jaimie08mazd2070
tracker2038
the_gray_maz1874
87 turbo ii1692
dentinger1518
bkey711469
speedy31136

New Vendors
Sportwing
AMSOIL - Performance Oil Technology

Mazda Forum .com is not affiliated with or endorsed by Ford Motor Company.