Brake pedal on floor (Full Version)

Mazda >> Mazda Vehicles >> Mazda Pickup Trucks

Brake pedal on floor

  

1owner -> Brake pedal on floor (1/7/2007 5:19:32 PM)

Changed out master cylinder twice on my 1991 B2200. Can't get the pedal back up to normal operating range. Bled according to Chilton procedures. Any thoughts?

  
nastynate -> RE: Brake pedal on floor (1/7/2007 8:45:35 PM)

need new brake pads? I believe their is a bolt behind the brake booster than can be adjusted so that the push rod in the master cylinder is closer, but no touching, the piston in the master cylinder.

monstermazda -> RE: Brake pedal on floor (1/7/2007 8:52:33 PM)

 when you bled them how much air came out of each? 

nastynate -> RE: Brake pedal on floor (1/7/2007 9:00:54 PM)

with adjusting the break booster push rod, their are certain measures that have to be takin. Fairly complex.

nastynate -> RE: Brake pedal on floor (1/8/2007 11:05:13 PM)

did you bench bleed the new master cylinder?

1owner -> RE: Brake pedal on floor (1/9/2007 10:45:37 PM)

This one is definitely SOLVED. Both of the calipers were frozen in their mounts. Disassembled and cleaned. Back to new. ball joints are next...

nastynate -> RE: Brake pedal on floor (1/11/2007 10:12:49 AM)

someone just asked about ball joints in this forum, you can look their, if not just stop and ask if you need any assistance.

  

Page: [1]

Return to Mazda Forum home page or view the Full Version of this page.