RE: truck shutting down
Login | |
|
RE: truck shutting down - 1/9/2007 10:50:06 PM
|
|
|
1owner
Posts: 9
Joined: 12/22/2006 Status: offline
|
Thanks for all the advice, but I'm planning on going after a fuel cutoff solenoid or a deceleration solenoid which I'll bet are causing this b.s. Wow! Those are some engineering marvels there, huh?
|
|
|
|
|
|
|
|
RE: truck shutting down - 1/12/2007 11:30:07 PM
|
|
|
Singing Preacher
Posts: 7
Joined: 8/15/2006 From: Mannford, Oklahoma Status: offline
|
My 1990 B2200 acts simillar to what yours is. It will take off just fine, but going down the road it will act as if you turned off the ignition, but picks right back up. I checked my fuel tank and ended up changing my fuel pump, which did not help my problem. Please let me know what you find on yours. I am at a loss right now. I believe it to be something electronic, but have no clue.
|
|
|
|
RE: truck shutting down - 2/8/2007 11:50:41 AM
|
|
|
lithopro
Posts: 3
Joined: 2/8/2007 Status: offline
|
The fuel filter on these trucks if they're fuel injected is on the firewall passenger side. As for your stumbling problem, mine didn't stumbler after a while, it would run and die and then NO spark. I eventually traced it to a leaking capacitor on the ECM board that shorts other circuits on the board. Here's a link that help me with a visual. http://www.avproecm.com/index.htm I didn't use them for the repair job and instead went o another repairman on Ebay.
|
|
|
|
RE: truck shutting down - 4/14/2007 9:56:36 AM
|
|
|
1owner
Posts: 9
Joined: 12/22/2006 Status: offline
|
UPDATE: Not a fuel related issue at all. New pickup coil and ignitor installed. Runs as new. Please take note.
|
|
|
|
RE: truck shutting down - 4/14/2007 12:14:40 PM
|
|
|
Cusser
Posts: 133
Joined: 3/11/2007 Status: offline
|
1owner - how did you or your mechanic diagnose this? I had same issue 1.5 years ago, my mechanic at first thought carburetion/computer but his partner guessed ignotor & pickup, even though the symptoms were not those typical failures (mine would stall after 45 seconds of idling). He took the distributor off his son's B2200 and tried it on mine to diagnose, because those parts are pretty expensive (and he didn't want to stick me with $$$ that didn't help me).
|
|
|
|
Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Mazda Prices
Mazda
Mazda Miata MX5
Mazda 3
Mazda RX-7
Mazda RX-8
Advertising Info
|
Contact Us |
Sitemap |
Advertising |
Automotive Directory |
Mazda Links |
About Us |
Archive |
Legal |
Privacy Policy |
© Mazda Forum
Mazda Forum .com is not affiliated with or endorsed by Ford Motor Company.
|