91 2600i clutch

Mazda Forum Mazda Classifieds Photo Gallery Member List Search Contact Us Sponsors
Models Mazda News Mazda Recalls TSBs Timeslips Register Login

91 2600i clutch

Printable Version

Mazda Forum >> Mazda Vehicles >> Mazda Pickup Trucks >> 91 2600i clutch

Page: [1]

Message

<< Older Topic Newer Topic >>

91 2600i clutch - 12/8/2006 12:22:29 AM

mwce2

Posts: 37
Joined: 11/16/2006
Status: offline

I dont know if these trucks do this or not but my clutch seems a bit slow when I release if I take my foot off of it fast there is a slight delay for it to return back up clutch holds just fin do I just need to lubricate something?

Post #: 1

RE: 91 2600i clutch - 12/9/2006 10:24:54 PM

kallgrer

Posts: 19
Joined: 9/21/2006
Status: offline

Since these trucks have hydraulic clutches, they need to be bled if any air gets in the line. Bleed your clutch just like you would your brakes. Make sure the clutch master cylinder is full and with the wheels chocked, have someone depress the clutch. When the clutch is in, cycle open and shut the bleeder screw that is on the slave cylinder which is located on the passenger side of the transmission, then release the clutch pedal. Repeat this process until no more air bubbles are visible in the fluid. Don't forget to hook up a tube to the fitting on the bleeder screw so you don't get brake fluid everywhere. Enjoy!

(in reply to mwce2)

Post #: 2

RE: 91 2600i clutch - 12/10/2006 11:18:29 PM

mwce2

Posts: 37
Joined: 11/16/2006
Status: offline

Thanks I will try it

(in reply to kallgrer)

Post #: 3

RE: 91 2600i clutch - 12/14/2006 12:10:16 AM

mazdab2600

Posts: 119
Joined: 5/11/2006
Status: offline

quote:

ORIGINAL: mwce2

I dont know if these trucks do this or not but my clutch seems a bit slow when I release if I take my foot off of it fast there is a slight delay for it to return back up clutch holds just fin do I just need to lubricate something?

i noticed this just a weekago with mine but it was cold(-20c)
it only did it a few times (4-5) and only that morning
will keep you posted if it happens again and if i find anything

_____________________________

http://www.cardomain.com/ride/2311787

(in reply to mwce2)

Post #: 4

RE: 91 2600i clutch - 12/14/2006 12:41:24 AM

mwce2

Posts: 37
Joined: 11/16/2006
Status: offline

Mine has done this far as long as I can remember.

(in reply to mazdab2600)

Post #: 5