Torque Spec

Printable Version

Mazda Forum >> Mazda Vehicles >> Mazda Millenia >> Torque Spec

Page: [1]

Login Message << Older Topic   Newer Topic >>

Torque Spec - 11/14/2006 6:22:53 PM    CuLayTur   Posts: 2 Joined: 11/14/2006 Status: offline I am wondering if somebody would be kind enough for provide me with the torque spec of the two bolts that hold the front caliper to the caliper bracket... This would be for the '95 Millenia S.. Thanks, Curt < Message edited by CuLayTur -- 11/14/2006 6:23:38 PM > Post #: 1

RE: Torque Spec - 11/14/2006 8:31:14 PM    keninn   Posts: 389 Joined: 9/2/2005 Status: offline 76-101 ft/lbs, from my 99 service manual. (in reply to CuLayTur) Post #: 2

RE: Torque Spec - 11/14/2006 9:48:41 PM    CuLayTur   Posts: 2 Joined: 11/14/2006 Status: offline Thanks... That seems a little high..... This is for the caliper slide pins?? (in reply to keninn) Post #: 3

RE: Torque Spec - 11/15/2006 8:40:08 PM    2000smazda Posts: 120 Joined: 6/14/2006 Status: offline Hand tight or try about 20 to 25 ft/lbs (in reply to CuLayTur) Post #: 4

RE: Torque Spec - 11/16/2006 9:09:22 PM    keninn   Posts: 389 Joined: 9/2/2005 Status: offline ok, fixed saddle to knuckle is 75-101. the other 2 are 47-62. 25 aint gonna cut it. (in reply to 2000smazda) Post #: 5

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Mazda Prices

Mazda
Mazda Miata MX5
Mazda 3
Mazda RX-7
Mazda RX-8

Top 10 Posters
virgin1 4922 babyhuey 2759 sstlaure 2340 jaimie08mazd 2057 tracker 2038 the_gray_maz 1874 87 turbo ii 1692 dentinger 1518 bkey71 1469 speedy3 1136

New Vendors
Sportwing
Med Center Mazda
AMSOIL - Performance Oil Technology