'99 Millenia CEL P0105

Mazda Forum Mazda Classifieds Photo Gallery Member List Search Contact Us Sponsors
Models Mazda News Mazda Recalls TSBs Timeslips Register Login

'99 Millenia CEL P0105

Printable Version

Mazda >> Mazda Vehicles >> Mazda Millenia >> '99 Millenia CEL P0105

Page: [1]

Message

<< Older Topic Newer Topic >>

'99 Millenia CEL P0105 - 8/25/2005 6:30:23 PM

frist44

Posts: 1
Joined: 8/25/2005
Status: offline

I have a '99 Millenia S and got the code of P0105. Anything I can do?

Thanks.

Post #: 1

RE: '99 Millenia CEL P0105 - 8/26/2005 3:02:44 PM

gtxtreme

Posts: 120
Joined: 5/31/2005
Status: offline

DTC P0105; manifold absolute pressure sensor circuit malfunction. Located behind passenger side front strut tower, has three wire
connector & vacuum hose. First, disconnect the vac hose, let engine ilde & check for vacuum at the hose end. If not vacuum, trace the hose back to the intake manifold, disconnect & check for vacuum @ the port, clean with drill bit by hand if plugged. If you have good vacuum @ the sensor, then you'll need a hand vacuum pump & voltmeter to check sensor operation. After that the next step is to test for continuity from the sensor connector to the PCM ( powertrain control module)

(in reply to frist44)

Post #: 2