MODIFICATIONS:
-Custom Twin Turbo Setup
-2 Turbonetics T3 Super 60s A/R .36
-Custom mounted Spearco Intercooler
-Raptor BOV
-Custom SS 321 Piping
-NGK 6ix one step colder spark plugs gapped @ .032
-Labonte Stage 2 Water/Meth Injection Kit
-PowerMod Advanced Engine Managment System (currently the only Mazda 6 with it)
-Granatelli Motorsports Pro Series Extreme 65,000 volt Performance Ignition Coils
-Throttle Body Coolant Bypass with T-fitting delete
-Fidanza 9 lbs. Lightweight Aluminum Flywheel
-Clutchmasters FX300 Kevlar clutch
-MFactory Prototype Forged Helical LSD
-ARP Ring Gear to Differential Mounting Hardware
-Modified/Optimized EGR system modification
-Custom Performance Engineering (CP-E) Lower Transmission Mount (70 Durometer Stiffness)
-AWR Upper Transmission Mount (88 Durometer Stiffness)
-AWR Passenger Side Head Mount (88 Durometer Stiffness)
-N2MB WOT Box with 2-step and No-lift Feature
-TWM Short Throw Shifter w/bolt and hold-down modification
- Cordova Motorsports Custom Throttle Body, 60mm polished/ported/optimized w/ knife-edged throttle plate, throttle plate main shaft deleted/trimmed and remounted with countersunk screws
-Custom Lightweight Aluminum Alternator Pulley(limited run item)
-Fluidampr 10% Underdriven Crank Pulley (limited run item)
-Custom Oil Catch Can
-NRG Engine Grounding Kit
-NRG Chrome Hood Dampers(modified by me)
-custom under hood mirror inserts by unthehoodinc.com(1st and only mazda 6 with them)
-Rear hood weather stripping removal(for heat expelling)
-Ported Lower intake Manifold Runners
-O2simulator.com smart chip O2 simulator
-Battery Relocation to Trunk
Brakes and Suspension:
-Tein S-Tech Suspension
-R1 Concepts slotted and drilled rotors (front and rear)
-Axxis High Performance Ceramic Brake Pads
-Racing Beat Front Sway Bar
-AWR High Performance Adjustable Sway Bar Endlinks
-Motul RBF 600 Racing Brake Fluid (Dry Boiling Point 593 degrees F)
-Tanabe Front Strut Brace
-Megan Racing Lower Chassis H-Brace
-Techni-Fit Blue Stainless Steel Brake Line Kit
-Techni-Fit Blue Stainless Steel Clutch Line
Exterior:
-Autoexe GG-02 Front Bumper, 2-toned w/ black accenting(not sold in the states)
-Cyber Full Rear Bumper (2-toned w/ black accenting)
-Cyber Side Skirts
-Car-LED Black Housing LED conversion tail lights(one of the first imported sets)
-four way Brake-light Modification
-Mazdaspeed 6 Black Housing Headlights
-Black headlight eyelids
-Custom Flying “M” Emblems
-Mazda 6 Debadging
-Door Guard deletion
-Blue LED headlight marker lights
-Mazda CX-7 Stereo Antenna
-Aftermarket Sunroof w/ wind deflector
-Hyperwhite Headlight turn signals
-Custom Powdercoated and Airbrushed RX-8 wheels
-Powdercoated White Lugnuts - Inverted Style
Interior:
-Full Custom Interior and Uphostery, Done by Gillin Custom Design from the floor to the roof, nothing went untouched.
-Custom Steering Wheel Airbag (patented)
-Blue LED dome lights
-Sony CDX-M9900 cd/dvd/mp3 player head unit
-Sony CDX-757mx ten disk cd changer
-Kicker Solobaric L7 – 10” Subwoofer in custom ported box
-Kicker KX600.1 mono class D amplifier
-Blue LED door sill lights
-Alfa Otto Racing Reverse Glow White Gauge faces
-Custom Stainless Steel Weighted Shift Knob (2 lbs)
-Custom White Accenting throughout the interior
-Custom Center arm-rest with Flying “M”
-Lotek Tri-gauge dash pod
-AEM uego wideband O2 gauge and controller
-Megan Racing Blacked out boost/vac gauge
-Megan Racing Blacked out oil pressure gauge
-Greddy Full Auto Black Turbo Timer
-Greddy Profec B Spec2 Electronic Boost Controller
Future Mods :
-Custom Chromed Valve Covers
-Forged Pistons/Rods
-Ported/Polished Heads
-Custom Sheet metal Intake manifold
-Direct Port Nitrous System
pics from august 1st, i'll post some updated ones with newer engine bay upgrades after this weekend
