intake & exhaust question

I just bought an AEM cold air intake and a magnaflow exhaust for my 6 its a 4 cyl and i herd the intake might suck in water and mess up my engine. any suggestions or wil that not happen? and for the exhaust i was wondering if i need special hooks to install it or will the stock ones work?

Ive got a Mazda3 and was thinking about getting an AEM intake for it, but I wanted to get a bypass valve to avoid getting hydrolock, but I spoke with sales/support at AEM and they said that their bypass valve doesnt work on the intake (at least on the 3s) since there's no spot to mount the bypass valve on the intake. But Im sure there is a way to do it if you cut the pipes and make a custom fit for it. I would call AEM and double check.

alright good deal bro thanks

all you need to do id cut your intake pipe about 3'' from your filter and put on the bypass valve
make sure the bypass valve is the same diameter of your pipe ..

I ran into the same thing. I bought an AEM cold air intake and it says that its "NOT TO BE USED WITH A BYPASS VALVE" So I called and it has to do with the way the air is brought in or something.....sounded like she was bullshi..ing me...

Either way, my 04 6s is still my primary car for now so I've yet to put it on. I'd definetly recommend getting an intake compatiable with a bypass valve.

If you are worried about hydrolock make sure you mount the filter high oor that the kit has ahigh mounting point. then if you are still worried fabricate a splash shield out of a sheet o fmetal or pliable plastic. Also I reccomned (with the stock intake on) close your hood and spray water all over the hood and at different angles along each seam then let the water run off the hood as it would naturally and open your hood, if there i swater where the new filter is going, fabricate and upper splash shield as well. Hope I could have helped. :)

i just put mine where the old one was, the only thing i took out/off was the stock intake, usually people who have a fear of hydrolocking is if there is alot rain around there way or if they cut a hole in the wheel well and have the filter sticking out...i did no such thing

quote:

ORIGINAL: 87 turbo II

If you are worried about hydrolock make sure you mount the filter high oor that the kit has ahigh mounting point. then if you are still worried fabricate a splash shield out of a sheet o fmetal or pliable plastic. Also I reccomned (with the stock intake on) close your hood and spray water all over the hood and at different angles along each seam then let the water run off the hood as it would naturally and open your hood, if there i swater where the new filter is going, fabricate and upper splash shield as well. Hope I could have helped. :)

that's the process that i did to ensure i didn't get water into my cai area. to take things a little bit further, i went ahead and purchased an Injen Hydroshield which beads alot of water off your filter to also help prevent hydrolocking. great invention, but you can also use a "soccer sock" or something, maybe even a pantyhose if you don't want to waste alot of money.

hmmm a pantyhosed filter...i can just imagine what people reaction when you say "yeah i got a custom made pantyhose filter"....damn i need to get photoshop

haha, you don't have to say anything about the custom air filter cover. just say you have a cold air intake. that way it saves you the embarassment, or you can tell them and make it sound like you are poor as hell (maybe someone will then give you a little money for a filter cover haha).

hmmm you just gave me idea, how does this sound *ahem* "yeah i got a CAI that i took from a junked 3, i had to make bypass valve...yeah thats styrofoam from my bumper...yeah thats electric tape holding it to the pipes...howd i cut the pipes?...lets just say it takes a long time with butter knifes...dont know if you can see it cuz my custom paper filter sock is blocking way but i have a dent in the filter...it came from when i was trying to clean it lets just leave it that, so yeah i cant put back my old one cuz i got drunk and burned it...i think, so my gas milage is pretty sucky so think you can help me out a little...thanx"

hahahhaa, tracker i almost died when i read that post... very creative!

Hey check out my new turbo, even though it's a hair drier it's gotta be blowing in some boost right? I've also got ram air by removing my headlights. Yeah she's prett sweet. I duct taped a 2nd cam to the valve cover to make it DOHC too, yeah I know you're jealous. 8)

quote:

ORIGINAL: the_gray_mazda6


hahahhaa, tracker i almost died when i read that post... very creative!

its what i do best

quote:

ORIGINAL: 87 turbo II

Hey check out my new turbo, even though it's a hair drier it's gotta be blowing in some boost right? I've also got ram air by removing my headlights. Yeah she's prett sweet. I duct taped a 2nd cam to the valve cover to make it DOHC too, yeah I know you're jealous. 8)

I knew somebody was reading my blueprints but now i got new ones, ok this is my plan *ahem*

My turbo will be instead of Hiboost it will be a hair dryer but it will be Sally's beauty parlor so that will give me +97 boost instead of the usual +2, this will also allow me run ~27bsi, yeah thats right i said bsi it stands 4 Bull S**t Intake, for all the n00bs here, oh and my custom intercooler will be taken from a Ollies brand A/C, and the hoses will be vaccum ones for maximum suckage, since its gonna be high powered the BOV will be silenced so ill just record one from a SRT-4 and have it on repeat.

wow Tracker you're the master on ghetto rigs. I'm guessing from first hand experience?

haha yeah....hey!!

And I thought I've done some creative "works" in my day...man you've got me beat!!

quote:

ORIGINAL: Tracker

haha yeah....hey!!

I'm just messin.

yeah the sarcasm was just pouring out of your post