How to Program Remote Keyless FOB on 2004 Mazda 3

Can any one provide me with instructions on how to program an extra remote keyless entry FOB on a 2004 Mazda 3s?  I can't find the instructions anywhere.  I've routinely done this procedure for other cars like my Mazda Tribute.

Never mind. Found this in another thread.  It worked just great.
 
----------------------
I found this on the Mazda6 forum and it works for the Mazda3:

http://forum.mazda6club.com/index.php?showtopic=2300&st=0&p=55368&#entry55368

Yes, this does work and I actually used it to program a 3rd remote for my Mazda3i (with power door locks).  8)
*NOTE*
Have all the remotes that you are going to be using, maximum of 3, with you when you do this programming as all of them have to be reprogrammed into memory.

Step 1: Open driver side door and leave open.

Step 2: Lock and Unlock the drivers door using the power door lock switch on the door

Step 3: Insert key into the ignition.

Step 4: Turn Key to ON position and return to Lock (off) position.  Do this 3 times within 10 seconds. LEAVE key in the ignition in Lock (off) position.

Step 5: Close and open the drivers door 3 times. Leave door open after this step

Step 6: ECU should respond by locking and unlocking the doors once.

Step 7: Press any button on remote #1 twice.  ECU responds by locking and unlocking the car doors.

Step 8: Additional remotes, repeat Step 7 for up to 3 remotes total.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series (about 4) of door locks and unlocks. You're done!

Sticky this please...

NOTE: Sticky it is. Should it be here or in another section, like the one where you learn how to program a key? Dinu

Hi
Jast bought 2004 mazda3 2.3 hachback and keyless dosn't work.
Tryed as above and after step 5) no respond,BUT when i remove key from ignition the car
locks and unlocks 2 times.
any advice.
and forgive my english.
Thanks.
 

The timing is important. You need to complete step 4 within 10 seconds.  Might also check the battery on the FOB.  That's all I can think of.  I know I have had good success with this on my 2004 Mazda 3 several times.