drop springs

hi everyone. i have a v6 mazda6s and i wanted to drop my car. i was just wondering if anyone knew where and if eibach carries springs that give a very suttle drop. i dont want to drop it too much for ground clearance reasons. i just want to close the fender gaps a little bit. i would prefer eibach springs but i cant seem to find anything that have no more than a 1.5 in the front and .75 in the back. i only came across Tanabe springs. are those any good? what about tein? are any of them stiffer than the stock springs?

Hey look i don't know the answer to your question but i just want to say any girl driving a mazda 6 is hot lol

quote:

ORIGINAL: mazda6gyrl

hi everyone. i have a v6 mazda6s and i wanted to drop my car. i was just wondering if anyone knew where and if eibach carries springs that give a very suttle drop. i dont want to drop it too much for ground clearance reasons. i just want to close the fender gaps a little bit. i would prefer eibach springs but i cant seem to find anything that have no more than a 1.5 in the front and .75 in the back. i only came across Tanabe springs. are those any good? what about tein? are any of them stiffer than the stock springs?

I have the Tanabe GF210 springs on my 05' 6S. The drop is good & so is the ride quality. Check here to see what choices you have http://www.therpmstore.com/index.php?cPath=26_53&osCsid=a5b449f1976735aac6ebcaf5c8058307

I went with the Eibach Prokit drop on my 3 and it was 1" all around (about as mild a drop as I could find.)  The ride was great.

friend of mine has the tanabe gf210 springs as well and couldn''t be happier. they offer quality products. 

some coilovers would work great too.

i suggest you to buy the mazdaspeed spring with the camber kit. they will drop only 1/2 inch, it will ook nice. i have them in my mazdaspeed 3. You can buy them for $385. Even you buy any other brand for $200, you should buy the camber kit that is about $150-180, so at the end it is same. the only dif is how much low you want the car.