1owner
1/7/2007 5:19:32 PM
Changed out master cylinder twice on my 1991 B2200. Can't get the pedal back up to normal operating range. Bled according to Chilton procedures. Any thoughts?
nastynate
1/7/2007 8:45:35 PM
need new brake pads? I believe their is a bolt behind the brake booster than can be adjusted so that the push rod in the master cylinder is closer, but no touching, the piston in the master cylinder.
monstermazda
1/7/2007 8:52:33 PM
when you bled them how much air came out of each?
nastynate
1/7/2007 9:00:54 PM
with adjusting the break booster push rod, their are certain measures that have to be takin. Fairly complex.
nastynate
1/8/2007 11:05:13 PM
did you bench bleed the new master cylinder?
1owner
1/9/2007 10:45:37 PM
This one is definitely SOLVED. Both of the calipers were frozen in their mounts. Disassembled and cleaned. Back to new. ball joints are next...
nastynate
1/11/2007 10:12:49 AM
someone just asked about ball joints in this forum, you can look their, if not just stop and ask if you need any assistance.
